Do You Really Need to Buy NEW Guitar Pickups???

/, Guitar pickups are microphones, Guitar repair by/Do You Really Need to Buy NEW Guitar Pickups???

Do You Really Need to Buy NEW Guitar Pickups???

image guitar pickups for Strat inside view

guitar pickups

image guitar pickups for Strat inside view

guitar pickups

So You’ve Decided You Need New Pickups-Why?

Image result image guitar pickups for Strat inside view

image guitar pickups for Strat

image guitar pickups for Strat inside view

guitar pickups

image guitar pickups for Strat inside view

guitar pickups

So You’ve Decided You Need New Guitar Pickups-Why?

Image result for exploded view of single coil pickups for guitar

Single Coil Pickups From Haywire Custom Guitars

https://haywirecustomguitars.com/guitarpickupreplacement.html

It’s always great to hear a players opinion on our guitars because it keeps

us going in the right direction. Here are some excerpts of an article I wrote about finding your sound. Guitarists sometimes see greener grass when it could be its already green enough. They love to customize their guitars. The first thing they want to change are the pickups. Having never built one or tested a guitar pickup most players will forge ahead anyway and make the BIG CHANGE. I have to ask….Why?  Have you tested yours first?  Is it at the max height for best sound?  Is it broken?  If it’s picking up sound it’s doing the job.
A guitar pickup is very much like a microphone-find your Sweet Spot!
It basically mirrors back the sound.
It simply hears the sound signal and transfers it to the amp & speaker. When you’re singing what do you notice about voice quality when backing off the mike or singing very close? Is there a “sweet spot” where its perfect? Same goes for pickups. There are a few factors you may want to test before you go to the trouble  and expense of adding new pickups.

After all, I use all kinds, all brands and styles in the custom guitars I build guitars for players and still find it difficult to determine if there is much difference between most. They are magnets and copper wire.

All pickups have the basically the same ingredients.
Image result for inside view of single coil pickup forguitar

Single Coil guitar Pickups From Haywire Custom Guitars

Image result for pickups winding copper guitar wire

Single Coil guitar Pickups use copper winding wire: Haywire Custom Guitars

Before you buy a new car do you ask the mechanic his opinion or the car salesman?
Pickup companies are trying to sell you on their brand, guitar mechanics will give you the facts. Salesman will give you the bull.

So….. try the least expensive methods first before going nuclear with NEW Guitar Pickups

First: test the strings and try a string change to a different set of strings. Newer strings are generally stiffer and fresher thus a cleaner tone. Also, try a heavier gauge string to give you more body in the sound.
The second test for you will be more subtle, but it will be very effective. It involves distance and signal strength. The pickups have elevator screws that are there to raise and lower them closer or farther from the strings. You’ll just need a Philips head screw driver and turn until you see the pickups move either up or down where you want them and repeat the process until the pickups are within the range where they will hear the strings close up and personal.
Then begin your testing. Play,…. then lower the guitar pickups incrementally between testing sessions so as to try several different levels of signal strength. Only in this way can you hear the differences. Remember, clarity and sound quality have more to do with “Your” ear than what other players hear.
A clean sound for some players may find the guitar pickups very low under the strings whereas a clean sound for other players may find the pickups snugged as close to the strings as physics will allow. Distortions can occur on the extremes of this spectrum
The next test is to check the amp you are playing from. For this test you need a clean control. Be sure there are no obstructions or ways in which players like to process or in some cases “over process” themselves to impeded the pure sound of what the guitar pickups hear. This means plug the guitar directly into the amp with no pedals, stomp boxes or effect in between to change the tone.
Your results will be much better. Some players make the mistake of testing each guitar on the same setting in their search for the ideal sound in a guitar when the result will simply be just testing how different guitars sound on the same setting.
This test will produce results–but not the results you’re looking for. Remember, every guitar is set up differently. The strings are generally different ages or brands. So for the perfect empirical evidence needed everything must remain the same.

 Flatten The EQ

 
So, to make sure you’re getting the sound you want to hear from your guitar pickups try different EQ settings on the amp. Be sure that if there are two volume controls turn the channel volume low and the master way up. Start with flat EQ setting the introduce more or less high and low frequencies to get the sound best for your ear and the music that you are playing.
Keep in mind a change of pickups should be one of the last resorts in finding your sound and not the first.
Image result for pickup winding on a drill

Winding a single coil guitar pickups with an electric drill

Always thoroughly investigate what you have before you change it.  

There are so many brands of guitar pickups how do you know where to start?   With some 100 plus pickup manufacturers just in the USA if you decide on a brand then the next problem is which pickup does that brand have that will do the job? At $150 average price for a set of 2 pickups just for a Telecaster how long can you afford to keep making changes in your search for the Holy Grail?  If after these free tests you should decide a pickup change is warranted be sure to take an experienced tech with you to the pickup store. The specs you’ll need to be aware of are output and magnet strength. Output, measured in Ohms has nothing to do with tone or clarity just resistance. The magnet strength is important because a larger heavier magnet will cause the strings to be pulled out of tune and thwart sustain so be very careful here so as not to equate magnet strength or Ohms with “better quality”. The least expensive fixes are often the most effective. If done properly and methodically you’ll be surprised a what you’ll find  and how many different tones are already in your pickups if you peek inside.
Image result for view of single coil pickup with cover removed

New guitar pickups.

Richard R Mariner CEO
Haywire Custom Guitars Inc.
Haywire Custom Shop
http://www.haywirecustomguitars.com
843-347-5742

About the Author:

Mr. Rick Mariner Owner and Founder and CEO of Haywire Custom Guitars Inc. He is a member of The Association of Stringed Instrument Artisans (A.S.I.A.) as well as a guitar player. Rick holds a bachelors degree from University of Md. and a Masters degree from George Washington University. Rick developed his exclusive 8 – Point “Gig- Ready” guitar process that allows for Custom Guitars that are “GIG-READY”. With Rick’s many years of development and guitar set-up experience, Haywire Guitar shop “Builds satisfied players… one Haywire guitar at a time”.

Leave A Comment