Wouldn’t it Be Great to Be Able to Buy a Guitar That Felt Gig Ready Right Out of the Box?

/, guitar by Haywire, http://www.haywirecustomguitars.com/, https://www.flickr.com/photos/haywirecustomguitars//Wouldn’t it Be Great to Be Able to Buy a Guitar That Felt Gig Ready Right Out of the Box?

Wouldn’t it Be Great to Be Able to Buy a Guitar That Felt Gig Ready Right Out of the Box?

Gig-Ready Guitars

By: Richard Mariner
image Expert Author Richard Mariner inventor of the Haywire Custom Guitars Gig-Ready Process

Expert Author Richard Mariner inventor of the Haywire Custom Guitars Gig-Ready Process

Author and Founder of Haywire Custom Guitars Inc. Richard Mariner
image Rick Mariner working on a guitar issue in the Haywire Custom Guitars -Custom Shop

Rick Mariner working on a guitar issue in the Haywire Custom Guitars -Custom Shop

Rick Mariner working on a guitar issue. Update: fixed!

I love gig-ready guitars, and there’s nothing like a new electric guitar with a proper set up! I like the tone, the way it feels in my hands, and the way it can sound “right” for any kind of music. Whether it’s jazz, blues, country, hard rock, R & B leads, guitar chords, or just working on songs, all it takes is a flip of a switch, some prep, a couple twists of the knobs, neck alignment and I’m right where I need to be.

 

After working on a lot of guitars over the years, I discovered that taking that beautiful new Strat or Tele guitar out of the box was always just the first step in finding the gig-ready guitars that fit in my hands the way that I imagined they would when they first caught my eye.

After a close inspection my new guitar wouldn’t be a gig-ready guitar until I did all of the little subtle tweaks, repairs and modifications that would make it play just the way it should for me out on the gig. Dress the frets, get the intonation just right, tweak the pick-ups, customize the configuration a bit, and before you know it, I’d be playing a guitar that felt like it was made to be in my hands. Playing music is always fun, but when I’m on the gig with a guitar that feels just right… it’s just pure guitar joy.

Accurate intonation is critical to pitch quality

Wouldn’t it be great to be able to buy gig-ready guitars that felt gig ready right out of the box?” As wonderful as that idea may seem, in reality it’s almost impossible to pick up a guitar in a music store “off the rack” and have it play right. It just doesn’t happen. There are many things that need to be done to “prep” the guitar before it’s ready to play. At Haywire Custom Shop we recommend and perform all of the following in prep for a guitar purchase before it leaves the bench at the workshop. For our purposes here I will focus only on electric instruments for now. First, let me pose a question to the beginning through the advanced guitarist.

Setting the intonation

What Is Guitar Intonation and why is it important? Do you know?
Intonation is the accuracy in which an electric guitar or bass can produce a fretted note and the most important issue with any instrument. Setting the intonation on a guitar is the act of adjusting the length of the strings (by moving the bridge saddles) to compensate for the thickness of the string and the stretching of a string due to pushing it down to the fret board to produce a note.

 

To adjust the intonation of your guitar or bass guitar, you move the bridge saddles toward or away from the fret board until the 12th fret note and its harmonic are equal in pitch to the same open-string note, which are exactly one octave apart.

Accurate intonation is critical to pitch quality. Pitch quality is essential to “in tune” playing. Poor pitch quality=”out of tune” notes which in turn = poor musical presentation. Wouldn’t you want to present your musical talents in the best way possible? Of course, you do.

Alignment of the guitar neck

Now, it is not necessary for a guitar player to know this at all. It is essential however that the guitar possess this quality and maintain as close to perfect intonation as possible. Buying on looks alone can be very disappointing. If however, you like an instrument for the looks but realize that you will need to have it worked on to get it playable then that is a savvy notion. It’s best to speak to a guitar tech,  repair expert or guitar builder previous to any purchase. It’s akin to asking a mechanic which car he would recommend-before you walk into the show room. In this way you can benefit from his first hand knowledge and experience and not have to go it alone. After all he sees the ones that breakdown more often than you or the car salesmen do.

Below, are outlined the essential adjustments to be performed prior to purchasing and playing  gig-ready guitars under optimal circumstances.

guitar neck is checked and adjusted

1. 4-axis Alignment of the guitar neck.
The guitar neck is checked and adjusted to insure that it is true and straight to insure proper alignment on all axis. This step insures proper action and allows for more accurate and easier guitar tuning, playing and set-up in the following steps.
2. Inspect and Lube the guitar tuning gears.
Each tuning gear is adjusted so that there is no play in the mechanism. They are then lubricated to insure smooth and even movement to make your guitar tune accurately.
3. Potting the guitar pickups.
Dip the pickups in hot wax to reduce squeal and unwanted guitar feedback.

Prep the guitar body

4. Prep the guitar body.
Upon installing the guitar electronic components, great care is taken to insure that all wires are properly routed, spaced, and grounded to insure years of trouble free service with your guitar.
5. Level and also polish the frets.
This insures that all of the guitar frets are level, eliminating any possibility of fret buzz due to unevenness.

Level and polish the frets

6. Radius the guitar strings.
Most guitar necks have a contour over the top of the neck called the “radius”. As a result, adjust the strings to make sure the height of each string follows the contour of the guitar neck.
7. Adjusting the overall guitar string height and the action.
Once the string contour and radius of the guitar strings is set, it’s time to adjust the overall height or “action” or distance of the strings from the top of the frets to the bottom of the guitar strings.
8. Set the guitar intonation and finally,
This step should be done twice. The intonation is normally set two times with a 24 hour period in between to allow the new guitar adjustments to properly re-seat.

If it is “set up” properly a player will not have to “get used to” it.

If these steps are performed before playing your new guitar then, you won’t be disappointed. Your focus can then be on the music and not the problems of the instrument. If it is “set up” properly a player will not have to “get used to” it. Everything on it will feel natural and fall right into place and the music can flow so you can lay back deep in the groove and just play………..

In summary, Guitar purchase “off the rack” can be a real disappointment. A thoughtful purchase should include consideration in buying a “custom” or  gig ready guitar  electric guitar versus a “pre-fab” instrument built on a production line. Custom guitars are individually built for a specific customer and will have all of the above necessary operations performed. All the guitarist needs to do is-Play!

Guitar purchase “off the rack” can be a real disappointment

Rick Mariner – Owner and founder of Haywire Value Priced Custom Guitars ( http://www.HaywireCustomGuitars.com ) and a member of The Association of Stringed Instrument Artisans (A.S.I.A.) as well as a guitar player. He holds a bachelors degree from University of Md. and a Masters degree from George Washington University.
Haywire developed an 8 – Point “Gig- Ready” guitar process that allows for a Haywire Custom Guitars gig ready guitar. With many years of development and guitar set-up experience, we pride ourselves in helping to build you the “Just Right” Haywire guitar for you at prices well below market.

 

image results for Haywire Custom Guitar Stratocaster-Haywire gig-ready guitars

Gig-ready guitar

Haywire gig-ready guitars

Ordering From Haywire Custom Guitars

If you would like to order this or any other custom guitar, please contact us and we will be happy to discuss your guitar needs.

About the Author:

Mr. Rick Mariner Owner and Founder and CEO of Haywire Custom Guitars Inc. He is a member of The Association of Stringed Instrument Artisans (A.S.I.A.) as well as a guitar player. Rick holds a bachelors degree from University of Md.and a Masters degree from George Washington University. Rick developed his exclusive 8 – Point “Gig- Ready” guitar process that allows for Custom Guitars that are “GIG-READY”. With Rick’s many years of development and guitar set-up experience, Haywire Guitar shop “Builds satisfied players… one Haywire guitar at a time”.

Leave A Comment