How Haywire Guitars Changed My Life. |
| Rusty Fender from Aynor SC, writes..... |
Before After
This is me before I started playing my Haywire guitar. This is me after 6 short months as a Haywire
Overweight, poor, unhappy and alone. Custom guitar player. Rich, trim and sexy.
Our exclusive 8-point gig ready guitar process …
1. 4-axis Alignment of the guitar neck
Each guitar neck is checked and adjusted to insure that it is true and straight to insure proper alignment on all axis. This step insures proper action and
allows for more accurate and easier guitar tuning, playing and set-up in the following steps.
2. Inspect and Lube the guitar tuning gears
Before installing the guitar tuning gears, each one is checked thoroughly. Each tuning gear is adjusted so that there is no play in the mechanism.
They are then lubricated to insure smooth and even movement to make your guitar tune accurately.
3. Potting the guitar pickups
We dip the pickups in hot wax to reduce squeal and unwanted guitar feedback.
4. Prep the guitar body
Before installing the guitar electronic components, great care is taken to insure that all wires are properly routed, spaced, and grounded to insure years
of trouble free service with your guitar.
5. Level and polish the frets
This insures that all of the guitar frets are level, eliminating any possibility of fret buzz due to unevenness.
6. Radius the guitar strings
Most guitar necks have a contour over the top of the neck. We adjust the strings to make sure that height of each string follows the contour of the
guitar neck.
7. Adjusting the overall guitar string height and the action
Once we set the contour and radius of the guitar strings, it’s time to adjust the overall height of the strings from the top of the frets to the bottom of
the guitar strings.
8. Set the guitar intonation
This step is done twice. The intonation is set two times with a 24 hour "seat-in" period in between to allow the guitar to properly re-seat to the new
adjustments.
1. 4-axis Alignment of the guitar neck
Each guitar neck is checked and adjusted to insure that it is true and straight to insure proper alignment on all axis. This step insures proper action and
allows for more accurate and easier guitar tuning, playing and set-up in the following steps.
2. Inspect and Lube the guitar tuning gears
Before installing the guitar tuning gears, each one is checked thoroughly. Each tuning gear is adjusted so that there is no play in the mechanism.
They are then lubricated to insure smooth and even movement to make your guitar tune accurately.
3. Potting the guitar pickups
We dip the pickups in hot wax to reduce squeal and unwanted guitar feedback.
4. Prep the guitar body
Before installing the guitar electronic components, great care is taken to insure that all wires are properly routed, spaced, and grounded to insure years
of trouble free service with your guitar.
5. Level and polish the frets
This insures that all of the guitar frets are level, eliminating any possibility of fret buzz due to unevenness.
6. Radius the guitar strings
Most guitar necks have a contour over the top of the neck. We adjust the strings to make sure that height of each string follows the contour of the
guitar neck.
7. Adjusting the overall guitar string height and the action
Once we set the contour and radius of the guitar strings, it’s time to adjust the overall height of the strings from the top of the frets to the bottom of
the guitar strings.
8. Set the guitar intonation
This step is done twice. The intonation is set two times with a 24 hour "seat-in" period in between to allow the guitar to properly re-seat to the new
adjustments.
| Instruments for Professionals Realize Your Potential |
| Haywires’ 8 point “gig ready” process ... helps keep YOU ready! |
guitar, Fender guitar, Stratocaster guitars, Telecaster guitars, Tele guitar,guitar repairs, custom guitar,custom guitars,Haywire
guitar intonation, guitar modifications, gig readyguitars, Haywire guitar, Rick Mariner, guitar tabs, guitar chords
guitar intonation, guitar modifications, gig readyguitars, Haywire guitar, Rick Mariner, guitar tabs, guitar chords
| Each Haywire Custom Guitar comes with a Certificate of Authenticity and Unique serial number so you can identify your guitar and we can identify our workmanship which is guaranteed a full year. |
